Intellinet Gigabit PoE++ Injector (561495)

Gigabit PoE++ Injector, One 95 W Port, IEEE 802.3bt (4PPoE) Compliant, Plastic Housing, Wall-mount Option - Retail Box
Inject 95 Watts of Power Into Your Internet of Things (IoT) or PoE++ Network! IEEE 802.3bt Compliant The Intellinet Network Solutions Gigabit PoE++ Injector provides up to 95 W using all four pairs of twisted-pair network cabling to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Point-of-sale card readers & printers need up to 60 watts. Lighting fixtures and controllers require 40 to 50 watts. Some motorized IP cameras need more than 70 watts. The IEEE 802.3bt standard is an excellent solution for bringing power to these critical systems. As many new IEEE 802.3bt powered devices enter the market, you'll be ready for them with an Intellinet Network Solutions Gigabit Ultra PoE Injector.   Full Compatibility with Existing IEEE 802.3af/at Power over Ethernet devices The Intellinet Network Solutions Gigabit PoE++ Injector helps you connect your IEEE 802.3bt/af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3bt/af/at-powered device (PD) to a switch. Reduced Wiring Costs It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE++ Injector to the LAN switch port, and use the existing network cabling to deliver DC power as well as transfer data. Protected Equipment Once DC power is connected to your networked equipment through the network cabling, this Intellinet Network Solutions PoE++ Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads and high voltages. Save time and money by delivering data and power via existing network cables Total PoE power budget of 95 watts Compatible with IEEE 802.3bt (Ultra-PoE), IEEE 802.3at and IEEE 802.3af Short-circuit, overload and high-voltage protection Supports all IEEE 802.3bt-, IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP [Voice over Internet Protocol] telephones, IP surveillance cameras) Distance support: up to 100 m (328 ft.) Internal power supply Fanless design ideal for silent operation Wall-mounting option Fully NDAA-compliant Three-year warranty

Data Communications PoE Injectors

The PoE++ Injector TL-POE170S fully complies with IEEE 802.3af/at/bt standards with up to 60 W power supply. It can easily expand your network to where there are no power line or outlet, where you wish to fix devices such as PTZ IP Cameras, LED, etc. [Long Range Transmission] Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas. [Plug and Play Installation] Easy setup with no software installation or configuration needed.

TP-Link TL-PoE170S PoE++ Injector

The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The PoE Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices.

Intellinet 1-Port Gigabit High-Power PoE+ Injector

The 2.5G Ethernet PoE+ Injector from Intellinet Network Solutions passes both data and electrical power to a PoE-compatible device via standard Cat5e or Cat6 network cable. Equipped with one multi-gigabit Ethernet PoE+ copper output port, this injector can power an IP camera, a wireless LAN bridge and more while delivering ultra-fast network speeds up to 2500 Mbps, even if your network switch doesn't support PoE.

Intellinet 2.5g High-Power PoE+ Injector, One 30 W Port, IEEE 802.3at/af Compliant, 10/100/1000/2500 Mbps, Plastic Housing, Wall-Mount Option 561570

StarTech.com 4-Port Multi-Gigabit PoE++ Injector, 5/2.5/1G Ethernet (NBASE-T), PoE/PoE+/PoE++, Wall/DIN Rail Mountable : Electronics

Intellinet Gigabit PoE++ Injector (561495) –

LAN Power LP-2590 Single Port ULTRA High Power/PoE+ Midspan Injector Supports Powering IP End Devices

AXIS 30W Indoor Midspan, 240VAC

StarTech.com 4-Port Multi-Gigabit PoE++ Injector, 5/2.5/1G Ethernet (NBASE-T), PoE/PoE+/PoE++, Wall/DIN Rail Mountable : Electronics

Manageable Wireless AC1300 Dual-B& GbE PoE Indoor Access Point & Router – Intellinet Europe

The Ubiquiti U-PoE++ UniFi PoE++ Adapter is designed to deliver up to 60W of PoE++ with surge, peak pulse, and overcurrent protection. Features include an RJ45 data input, an AC cable with earth ground, PoE++ output, and an LED indicator for status monitoring. Plus, the adapter even offers more power for UA Hub, G4 PTZ, and other PoE++ devices.

Ubiquiti U-POE++ UniFi PoE++ Adapter - 60W

Inject 80 Watts of Power Into Your Internet of Things (IoT) or PoE Network The Intellinet Network Solutions 2-Port Gigabit Ultra provides up to 50 W on the first port and up to 30 W on the second port to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Lighting fixtures and controllers require 40 to 50 watts. Thin clients draw up to 50 watts.

Intellinet 561495 Gigabit Ultra PoE Injector

Intellinet PoE Injector - Converts Non-PoE to PoE Connections - Use CAT5 Ethernet Cable with RJ45 to Provide Both Power and Data – Supplies 15.4W up to 100 M (328 ft) Black 524179 : Electronics

Inject 80 Watts of Power Into Your Internet of Things (IoT) or PoE Network The Intellinet Network Solutions 2-Port Gigabit Ultra provides up to 50 W on the first port and up to 30 W on the second port to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Lighting fixtures and controllers require 40 to 50 watts. Thin clients draw up to 50 watts.

Intellinet 561495 Gigabit Ultra PoE Injector