PoE Power Splitter

PoE SplitterPoE and PoE+ compatibleConverts 12V DC IP cameras to PoE
CCTV Camera World is a direct supplier of security cameras and IP PoE camera systems backed by expert technical support. Call (877) 522-8836 today.
The Power Over Ethernet PoE Splitter is an adapter that allows conversion of 12V DC powered IP cameras in to PoE IP cameras. Usually IP Cameras are PoE and have an integrated PoE circuit board that allows the camera to accept power coming from a 802.3af/at compliant PoE switch. For cameras like our 5MP IP cameras with 300ft of night vision that don't have an integrated PoE power board and require 12V DC power, this adapter allows the user to convert the cameras to PoE so they can accept power from a PoE or PoE+ switch. When used with a PoE+ switch, this adapter will allow up to 2A of 12V DC current output from its 2.1mm standard CCTV power plug, and it will support a 10/100Mbps network connection. Pro user tip #1 In a scenario where you need to remove the Power component from a PoE signal, this splitter can come in handy. For example, to connect a PoE IP PTZ Camera that is PoE compatible to a PoE switch 150ft away, the PoE power provided from a switch will not be sufficient. The correct way is to connect the PTZ camera to the PoE switch for data transmission only, and provide power to the camera locally from a power outlet near the camera. Pro user tip #2 If you have a PoE camera that has a malfunctioning PoE power board, you can use this PoE adapter to power the camera over PoE as long as the camera has a 12V DC power plug.   Features  PoE power splitter Size 9 x 3 x 2 cm DC cable length 14.5cm RJ45 Plug cable length 14.5cm Date transfer rate 10/100Mbps Power Output DC12V 2A max Complies with IEEE 802.3af/at Power over Ethernet Data and power transmission distance up to 500ft   What's Included? (1) PoE Power Splitter

PoE Power Splitter

PoE Splitter. 48VDC 802.3af PoE input and passthru RJ45 Socket output. 24VDC 15W output on 5.5x2.1mm DC connector. 6 inch cablesThe POE-MSPLT-48xxP-F is a unique splitter with dual outputs. It accepts 802.3af or 802.3at PoE and provides 48V PoE and 48V or 24V or 12VDC outputs concurrently so two separate devices can be powered. The DC output is provided on a standard 5.5mm/2.1- 2.5mm barrel connector and the Data/PoE output is provided on standard RJ45 network connector, each on a 6 cable.

Tycon Systems POE-MSPLT-4824P-F 802.3af/at Split,48V PoE + 24VDC Out,15W

Output Power: 12V/1A, 15.4W, full IEEE 802.3af compliant. Widely use with most 12-volt devices. Input Power Voltage: DC 44-57V standard POE switches,

Active PoE Splitter - Power Over ethernet Splitter Adapter, 48V to 12V, IEEE 802.3af Compliant, 10/100Mbps PoE Splitter for Surveillance Camera, WAP

PoE Power over Ethernet, Passive Splitter Kit

48V to 12V POE Splitter Connector Poe Power Adapter injector Switch for IP Camera Wifi Cable Wall US/EU Plug

Active PoE Power Over ethernet Splitter Adapter 48V to 12V IEEE 802.3af Compliant 10/100Mbps PoE Splitter with 12V1.2A Output

YuanLey Gigabit PoE Splitter DC 48V to 12V/2A, IEEE 802.3af/at Compliant 10/100/

poe-s poe power over ethernet set, cat5 cat6, injector , separator / splitter

Avaya 1603 PoE Splitter (700415607)