⏠20.50 · 4.6 (211) · Auf Lager
A common issue with the projectors in OEM Valeo Bixenon housings fitted to B6 A4
A common issue with the projectors in OEM Valeo Bixenon housings fitted to B6 A4's is that the reflector bowl can become scorched which results in diminished light output. Instead of replacing the whole headlight housing, only to have the issue reoccur, one can use this bracket to replace the projector itself with Koito Q5-r Replica projectors or similar D1S bixenon projectors. This also allows you to retain the original ballast and bulb type (D1S) as well, to help keep cost down.
This modification is outlined in this Audizine thread
The credit for the original bracket goes to the OP of the thread who posted the DWG file. I simply modeled the mounting holes for the projector that were missing and created the STL so that it could be 3D printed.
Avoid using PLA material for this bracket, as the inside of the headlight housing can get fairly hot and any warping of the part will cause issues with beam alignment. I decided to use a Carbon Fiber Nylon material for good stiffness and dimensional stability as well as heat resistance. Although other materials may perform okay
right headlight washer 3D Models to Print - yeggi - page 45
B6) best 3D printer filesă»49 models to downloadă»Cults
Audi A4 best 3D printer modelsă»76 designs to downloadă»Cults
headlight washer 3D Models to Print - yeggi - page 52
STL file AUDI A4 đă»3D print model to downloadă»Cults
STL file Audi A4 B6 đă»3D printer design to downloadă»Cults
STL file Audi A4 B6 đă»3D printer design to downloadă»Cults
headlight support 3D Models to Print - yeggi - page 16
This is a kit for replace the old projector lens from OEM Xenon Headlight with a new one bi-xenon projector lens ( HELLA G5 )., Compatible with:,
Audi A4 B6 Bi-Xenon Retrofit
audi a4 b6 3D Models to Print - yeggi
STL file Audi A4 B6 Bi-Xenon Retrofit đă»Model to download and 3D printă» Cults
Audi B6 A4/S4 Bi-Xenon Headlight Dust Cap by copperbricks, Download free STL model