Tool Dip - Perles & Co

€ 13.99 · 4.6 (505) · Auf Lager

How to avoid marking metal wires with jewelry pliers? The Tool Dip is a product that prevents tools from scratching the wire, non-slip and guarantees a firm grip. It also makes it possible to greatly limit the marks on the metal wire when forming the wire with a jewelry pliers. There are pliers with silicone tips to avoid damaging jewelry primers, but if you want to use your own pliers then the tool dip is for you. This liquid product will dry on the tips of the forceps and will form a film comparable to silicone. This film can be removed at any time and does not damage your tools. Here is how to use this product. Material and advice : A pair of pliers, for this example, we used the round pliers with glitter handle, and of course the Tool Dip. Step 1 : Shake the jar of Tool Dip well before use. Clean the tip of the tweezers with a tissue, for example. 2nd step : Dip the tip of the pliers into the Tool Dip. Step 3: Remove the clamps slowly and evenly. Step 4: Leave to dry for about 2 hours. Step 5: Repeat steps 1 through 3, two times, to make three coats of Tool Dip. Step 6: To remove the Tool Dip, push it in with your finger.